TS-CCH Parameter Table

Model

TS-CCH

Sensor Head Connection Capacity

4,8,16

Sampling frequency

Single channel mode: Max.20 kHz; Dual channel mode: Max.18 kHz
Quad Channel Mode:Max.12.5 kHz;Eight Channel Mode:Max.8 kHz;
Sixteen Channel Mode:Max.4 kHz;(The above are preliminary
evaluation results,specifications may change at the time of final release)

Main functions

Data processing, encoder input, digital/analog IO

Input ports

Encoder input

AB/ABZ encoder input, can be configured for triggering

Trigger signal input

Pulse/level trigger

Output ports

Digital signal output

Alarm output, comparator output
(configurable as comparator output or data invalid warning)

Analog signal output

Linear ±10 V analog voltage output/4~20 mA analog current output (optional module)

Industrial interface

Ethernet interface

1000/100Mbps

RS485
USB interface

Modbus protocol, 19200~115200 baud rate
USB2.0 High-speed standard

EtherCAT

Optional configuration

Measurement control software

Host software Secondary development

TSConfocalStudio measurement software
C++ and C# software development package

Rated power

Power supply voltage

24VDC±10%

Current consumption

About 0.5A(When only one channel is enabled),
About 4A(When 16 channels are enabled),
It is recommended to configure
a power supply of 24V 6A or above

Environmental resistance

Operating temperature

0 to +50℃

Relative humidity

20 to 85%RH (non-condensing)

Weight

About 2,800g(varies depending on the numder
of channels and configuration)